Specialty Pumps/Motors: Hydraulic motor crossover relief MCX series motor - An RPMC series motor which contains an integral crossover relief valve.  Flows up to 20 GPM, pressures to 3000 psi. D series motor - An MD series motor which contains an external crossover relief block.  Flows up to 40 GPM, pressures to 2500 psi. Hydraulic pump integral relief CX series motor - A C series pump which contains an integral crossover relief valve.  Flows up to 20 GPM, pressures to 3000 psi. High pressure seals For pumps with high inlet pressures (charged suction) or for motor applications where a case drain line is impractical, Geartek offers high pressure seals.  This option is available in the C, D, and E series for pumps and motors (e.g. RPMCH, MDH, etc.). Low Pressure units For pumps where pressure requirements are less than 1000 psi, Geartek offers low pressure units.  These units are built to minimize mechanical drag at startup and at low pressure conditions to minimize required horsepower. Flow dividers Geartek has extensive experience building flow dividers across the C, D, and E series.  Flow dividers of 2,3,4 or more sections are available. Pump/Motor combinations Units where a Geartek motor is close coupled to a Geartek pump, available in C, D, and E series. These are a number of examples of specialty products we offer.  Contact us for your specific application requirements.